Payment & Shipping Terms:
|Max Capacity:||5 T||Name:||Pipe Welding Rollers|
|Wheel Material:||Rubber & Steel||Adjust Way:||Self Aligning|
|Certificate:||CE / UL||Packing Way:||Wooden Case|
|Speed Control:||VFD / Digital Readout||Tank Diameter:||300 - 2800 Mm|
|Application:||Tank Pipe Stands|
pipe stand rollers,
pipe support rollers
5 Ton Self Adjustment Pipe Welding Rollers, Tank Turning Rolls .
Voltage : 480V 60Hz 3p / Package in wooden case
Details Control System And Brand For Pipe Welding Rollers
1. Inverter is from Taida / Danfoss Brand
2. Motor is from CE Invertek Brand
3. Reducer is from Cable. Made in China.
4. Electric system is from Schneider / Siemens
5. Bearing is SKF / TIMKE
6. Speed Digital Readout on Hand control box.
1. Professional welding equipments, pipe welding rollers manufacturer since 1999.
2. Exported many equipments to European , America , Middle East and Southeast Asia etc. every year.
3. Pipe welding rollers voltage is availble according to your requirement to design.
4. One set delivery time within 10 days.
5. Warranty time up to 12 months.
Pipe Welding Rollers / Tank Turning Rolls Technical Detail Data
|Load capacity - Drive||2.5 tons maximum|
|Load capacity - Idler||2.5 tons maximum|
|Load capacity - Set||5 tons maximum|
|Rotation capacity||5 tons maximum|
|Vessels diameter||Min. 250mm ~ Max.2300mm|
|Rotation speed||100~1000 mm/min VFD|
|Rotation power||0.75kw with fan cooling|
|Roller wheels||PU (Polyurethane wheels)|
|Control way||Remote hand control + Foot pedal|
|Input Voltage||110V ~ 575V Single/3 Phase 50/60Hz|
Self- Aligning Pipe Welding Rollers Application
1. Operator must be training of the operation technical ability knowledge, and carry on to the following important point to study in earnest, strictly forbid someone carry on various operation under blindness.
2. In the normal circumstance ,the installation of pipe welding rollers had better adopt the bolt to fix originally.
3. When finished installation, check whether tight firmware of each port loosens to move the phenomenon or not, if have, please tighten them immediately.
4. When welding , equipments must have the credibility to connect ground wire, to insure the safety,
can't connect directly to roller , the in order to prevent damage bearings.
DO NOT HESITATE ! JUST SEND US YOUR INQUIRY NOW.
Contact Person: Jason Qian