Product Details:
Payment & Shipping Terms:
|
Max Plate Thickness: | 25 Mm | Max Coil Width: | 2500 Mm |
---|---|---|---|
Coil Speed: | 4 M/min | Motor Power: | 22 KW |
High Light: | sheet rolling machine,Plate Bending Machine |
3 Rolls Mechanical Plate Bending Machine , 25mm Thickness Plate Rolling Machine
Machine usage range
1. This equipment is three rolls machine, upper roller can adjust. It is used to bend different diameter of steel into circle sharp. And it is widely used in chemical industry, ships industry and so on.
Specification
Max rolling thickness |
CS 25mm |
Max rolling width |
2500 mm |
Max yield strength |
σs≤245MPa |
Plate rolling speed |
4m/min |
Main motor power |
22 KW |
Max spec. min bending diameter |
Φ700mm |
Diameter of upper roller |
Φ370mm |
Diameter of lower roller |
Φ270mm |
Working roller surface length |
2600mm |
Center distance of lower roller |
480mm |
Main structure and working principle
1. This machine is upper roller adjust type, and upper roller in middle of two down rolls
and drove by lead screw to move up/down and to bend the steel plate.
2. The equipment composed of working parts and drive system two parts. The working parts
composed of right and left bearing plate , one upper roll, two down rolls (these three
rolls material is 45# steel with heat treatment ), lifting screw and worm wheel and other
accessory parts. Down rolls drive upper rolls to move. Upper rolls can adjust up/down.
Drive system composed of main motor, main speed reducer gear and other accessory parts.
3. Down rolls were drove by main motor and main speed reducer gear, the spindle of main
speed reducer drive two down rolls by one group gears, the direction adjusted by the main
motor.
4. Upper rolls lifted by accessory motor and vice speed reducer drive worm pole and worm
where of right / left rolls bearing plate.
5. Unloading device is used for bending circle type to remove the work piece. While
unloading the upper rolls move to up limit position, the balance device on upper rolls ends
hit upper rolls to remove the work piece.
1. This is symmetric bending machine. The cylinder rolling is completed by the upper
roller which pressing to the lower one and the mutual rolling
Package And Delivery
1. Seaway is the most common transportation way for oversea trading. Depends on your location, combined transport by rail and sea is also an option.
2. Certainly railway transportation is also acceptable if it is the most suitable approach.
SEND US YOUR INQUIRY NOW.
Contact Person: Jason Qian
Tel: +8615261660915